🛞Alabama Air Brakes — Question 1 of 10
Which procedure is used for the spring brake test?
Answer: B
With the parking brake and tractor protection valve off, repeatedly press and release the brake pedal until pressure drops to 20 psi.
With the parking brake and tractor protection valve off, repeatedly press and release the brake pedal until pressure drops to 20 psi. The engine may be on or off.
Source: Alabama CDL Manual
All choices
- AWith a fully charged air system, turn the engine off, release all brakes, let the system settle then monitor pressure drop.
- BWith the parking brake and tractor protection valve off, repeatedly press and release the brake pedal until pressure drops to 20 psi.
- CRelease the parking brake, move forward to 5 mph and apply the brakes firmly. Note any pulling to either side.
Alabama CDL Air Brakes Test Info
Questions on Exam
25
Passing Score
80%
Time Limit
Typically 30 minutes; varies by testing location
Age Requirements
Intrastate: 18+ · Interstate: 21+
Alabama Law Enforcement Agency (ALEA)
Official CDL PortalReady to pass your Alabama CDL Air Brakes exam?
Get full practice exams, study mode, and simulated tests with detailed explanations.
Risk-free — cancel anytime, no charge until trial ends.
Study this on the go
More CDL Air Brakes Practice Questions
- To check the free play of manual slack adjusters of S-cam brakes, you should park on:
- A slack adjuster free play needs to be adjusted if it is more than about ____ when you pull hard on it.
- Stab braking:
- Which procedure is used in controlled braking?
- Which braking technique may be used to stop quickly when you do not have ABS?