Which hazardous materials classes must never be loaded under class 8 corrosive liquids?
Answer: A
Division 1.4, Division 4.1, or Class 5
Never load Class 8 (corrosive liquids) near or above Divisions 1.4, 2.3, 4.1, 4.3, or Class 5. They may not be loaded at all with several other Divisions.
All choices
- ADivision 1.4, Division 4.1, or Class 5
- BClass 3, class 6, or class 7
- CDivision 2.1, 3.1, or 5.1
Why the other answers are wrong
B. Class 3, class 6, or class 7
Classes 3, 6, and 7 are not specifically prohibited from being loaded under class 8 corrosive liquids.
C. Division 2.1, 3.1, or 5.1
Division 2.1, 3.1, and 5.1 are not the classes that must never be loaded under class 8 corrosives.
CDL HAZMAT Test Info
Questions on Exam
30
Passing Score
80%
Time Limit
Typically 30 minutes; varies by testing location
The HAZMAT test content is federally standardized, so this question applies in every state. Age limits, fees, and testing procedures do vary — check your state's CDL requirements.
Ready to pass your CDL HAZMAT exam?
Get full practice exams, study mode, and simulated tests with detailed explanations.
Risk-free — cancel anytime, no charge until trial ends.
More CDL HAZMAT Practice Questions
- Where should hazardous materials shipping papers be kept whenever you are parked and leaving the vehicle unattended?
- The basic description of a hazardous material includes the hazard class, the identification number and the proper shipping name. Which one must appear first in the shipping paper?
- You have loaded a hazardous material into a cargo tank. What must you do before you move the vehicle?
- You are going to be hauling hazardous materials over a route you do not know well. When should you check the route and the permits needed for the trip?
- A driver who transports controlled radioactive material must have had special training by the carrier within the last ____ years.